AABC 2014. Poster sessions

AABC Asia 2014 featured the following poster presentations:

1. Solid-State Battery Formulations: Influence of Compositions and Combinations
   Dr. Dee Strand, Wildcat Discovery Technologies
2. Heraeus Porocarb® – a New Class of Additives for Electrodes in Lithium Ion Cells
   Dr. Christian Neumann, Heraeus Quarzglas GmbH & Co. KG
3. Analysis of Advantages and Disadvantages of Different Anode Materials and Prospect Outlook
   Dr. Wenping ZANG, Tianjin Kimwan Carbon Technology & Development Co., LTD
4. Water-Based PVDF Binder for Improved Performance and Processing of Batteries
   Dr. Roberta Colombo, Solvay Specialty Polymers
5. New PVDF Binder for Balanced Flexibility and Adhesion of Electrodes
   Milena Stanga, Solvay Specialty Polymers
6. The Electrochemical Properties of the Modified 0.6Li[Li_1/3Mn_2/3]O₂ – 0.4 Li[Ni_2/5Co_1/5Mn_2/5]O₂ Cathode Materials for Lithium Batteries
   Dr. Hsiu-Fen Lin, Indutrial Technology Research Institute
7. A Comprehensive Approach to the Conductive Carbon Percolation Network in Lithium-Ion Battery Cathodes
   Dr. Pirmin Ulmann, Imerys Graphite & Carbon
8. Novel Conductive Carbon Additives for Ultra-High-Density Electrodes
   Satoshi Kubota, Nippon Chemi-con Corp.
9. New Carbon Coating Under LFP Active Material Layer Improves LIB Performance
   Yusuke Otsuka, Zeon Corporation
10. Development of Novel Carbon Black Conductors for Lithium-Ion Batteries
    Dr. Togo Yamaguchi, Asahi Carbon Co., Ltd.
11. Advanced Electrolytes for High-Voltage Lithium-ion Battery
    Ran Shi Wang, Nano and Advanced Materials Institute Limited (NAMI)

12. Performance and Application of Lithium-Ion Capacitors
    Dr. Chisato Marumo, JM Energy Corporation
13. Fabrication and Electrochemical Performance of a Large-Size All-Solid-State Lithium-Ion Battery
    Satoshi Fujiki, Samsung R&D Institute Japan
14. High-Performance Lithium-Ion Aqueous Battery for Large-Scale Energy-Storage, Automobile and Renewable Energy Applications
    Dr. Zhumabay Bakenov, Nazarbayev University
15. Synthesis of Hierarchical Porous Sulfur/Polypyrrole/Multiwalled Carbon Nanotube Composite Cathode for Lithium Batteries
    Dr. Yongguang Zhang, Nazarbayev University

16. Failure Analysis Testing of a Cycle Aged Automotive Lithium-Ion Battery Electrolyte
    Paul Voelker, Thermo Scientific
17. Analog Electronics for Cell Measurement and Balance in Large Lithium-Ion Battery Packs
    Michael Kultgen, Linear Technology Corporation
18. Three-Dimensionally Resolved Simulations of a LiCo0₂ Electrode Structure Obtained via FIB/SEM
    Gaetan Damblanc, CD Adapco Japan
19. Internal Impedance Estimation of Lithium-Ion Battery Using Arbitrary Waveform
    Yuki Tominaga, Honda R&D Co., Ltd. Automobile R&D Center
20. Output Fading Mechanism of Mixed Composite Cathode in Lithium-Ion Battery
    Kaori Hibino, Mitsubishi Motors
21. Performance Evaluation of Wireless Battery Management System
    Dr. Inseop Lee, Navitas Solutions
22. Safety and Performance Testing for Automotive Batteries
    Yuichi Aoki, ESPEC Corp.

23. Integration of Aluminium in Lithium-Ion Battery Packs
    Dr. Mathieu Grandcolas, SINTEF Materials & Chemistry
24. Lithium-Ion Battery Systems for Fully Electrical and Hybrid Light Aircraft Prototypes
    Hichem Smaoui, Airbus Group Innovations
25. Energy-Storage Technology Requirements for Heavy (Hybrid) Electric Commercial Vehicles – A Promising Growing Market and Durability Reference for High-Tech Batteries
    Samu Kukkonen, VTT Technical Research Centre of Finland
26. Lithium-Ion Battery Cooling by Direct Liquid Immersion  
    Prof. Hirokazu Hirano, Kanagawa Institute of technology